| |
 |
 |
|
|
| SSD (formerly FFD) SATA 2.5" |
 |
The SanDisk SSD SATA 2.5" (formerly
FFD 2.5" Serial ATA) is a state-of-the-art solid-state
flash disk, based on NAND flash technology, that provides the
functionality of a hard disk with no moving parts. SSD SATA
2.5ˇ± is an ideal, reliable storage solution for mission-critical
applications that must operate under harsh environmental conditions,
as well as for the telecommunication and blade server industry
that must support 99.999% availability.
SSD SATA 2.5ˇ± delivers outstanding reliability and enhanced
endurance thanks to SanDisk TrueFFS technology, which applies
dynamic wear-leveling and bad block management. Due to its unique
design, SSD SATA 2.5ˇ± provides high-performance sustained read
and write rates up to 150Mbytes/sec and supports Serial ATA
1.0a standard.
SSD SATA 2.5ˇ± is fully compatible with the SATA 1.0a interface,
and has the same mechanical dimensions and mounting holes of
traditional mechanical disks. It is a true drop-in replacement
for rotating 2.5" Serial ATA (SATA) and Serial Attached
SCSI (SAS) disks with highest reliability and operating mean
time between failure (MTBF) hours.
Specifications
Capacity
Unformatted (Gbytes): 1, 2, 4, 8, 12, 16, 24, 32, 40, 48, 56,
64, 72, 80, 88, 96, 104, 112, 120, 128
Compatibility
Serial ATA: High-speed serialized AT attachment, revision1.0a,
Serial ATA working group
Performance
Burst Read/Write: 150 Mbytes/sec (1.5 Gbits/sec)
Sustained Read: 44 Mbytes/sec
Sustained Write: 40 Mbytes/sec
Access time: <0.04 ms
Physical
Form factor: 2.5"
Case dimensions (mm): 100.2(L) X 69.85(W) X 9.5 to 22.5(H)
Weight: 0.1 Kg for 16GB; 0.22 Kg for 128GB
Environmental
Operating temperature
Commercial: 0ˇăC to +70ˇăC
Enhanced: -25ˇăC to +75ˇăC
Extended: -40ˇăC to +85ˇăC
Storage temperature: -55ˇăC to +95ˇăC
Humidity: 5% to 95% relative, non-condensing
Operating altitude: Up to 80,000 feet
Operating shock: 1,500G, MIL-STD-810F
Operating vibration:16.3G RMS (random, 10Hz to 2000Hz; 3 vibration
axes),
MIL-STD-810F
Reliability
MTBF 1,180,777 operating hours MTBF for 16GB based on Telcordia
SR-332, GB, 25ˇăC
EDC/ECC Embedded EDC/ECC, based on BCH algorithm
BER (Bit Error Rate) <10-20
Reliability features
Built-in power-up self-test (BIT)
Manual and automatic self-diagnostics
TrueFFS bad block management
Data integrity under power-cycling
S.M.A.R.T (Self-Monitoring, Analysis and Reporting Technology)
remote monitoring
Endurance
Unlimited read cycles
TrueFFS dynamic wear-leveling
Garbage collection process
Enhanced Security Erase
Entire disk security erase in seconds
Partial security erase
Auto-resume security erase/sanitize on power interrupt
Sanitize complies with NISPOM DoD 5220.22-M, NSA 130-2, Air
Force AFSSI 5020, Army 380-19, Navy NAVSO P-5239-26 and IREC
(IRIG) 106 NTISSP-9
Secure erase/sanitize software interrupt, hardware interrupt
optional
RoHS Compliant
Warranty 5 years
Ordering Information
SDSTH-CCCG-000000
SD: Prefix: SanDisk S: SATA
interface
T: Operating Temperature Range
Blank - Commercial: 0ˇăC to +70ˇăC
N - Enhanced: -25ˇăC to +75ˇăC
X - Extended: -40ˇăC to +85ˇăC
H: Case Height
A - 9.5mm up to 16GB
B - 14.5mm up to 64GB
C - 18.5 mm up to 112GB
D - 22.5 mm up to 128GB
CCC: Unformatted Capacity (Gbytes): 001,002,
004, 008, 012, 016, 024, 032, 040, 048, 056, 064, 072, 080,
088, 096, 104, 112, 120, 128
G: Gbytes
Note: 1 megabyte (MB) = 1 million bytes; 1 gigabyte (GB) = 1
billion bytes. Some of the listed capacity is used for formatting
and other functions, and thus is not available for data storage. |
|
 |
 |
|
ADD: Fortune Plaza, Shennan Road, Futian District, Shenzhen, P.C. China |
Copyright © HK Transung
Technology Group Limited , All Rights Reserved. |
|
|
 |
|
|
|
